Logo

회원가입로그인 ENGLISH naver youtube  
search 

IP명 A SAW-less Receiver Frontend Employing Switchable Mixer-Mode for Cellular Applications
Category Mixed Application RF Receiver
실설계면적 5㎛ X 5㎛ 공급 전압 1.2V
IP유형 Hard IP 동작속도 2.8GHz
검증단계 Silicon 참여공정 HM-1901
IP개요 In this paper, a surface acoustic wave (SAW)-less receiver (RX) front-end adopting switchable front-end architecture has been presented for 2G/3G/4G cellular applications. Depending on the RX-transmitter (TX) frequency separation, a favorable down-mixing architecture is selected between a current-sampling mixer and a voltage-sampling mixer. The proposed switchable architecture meets the specification of an input-referred second-order intercept point (IIP2) for the SAW-less RX while minimizing the power consumption. The implemented RX front-end consists of a
wideband capacitor cross-coupled common-gate low-noise amplifier, a 25% duty cycle passive mixer with IIP2 calibration circuitry, a baseband transconductor, and a trans-impedance amplifier. Simulated in a 180 nm CMOS process, the SAW-less RX frontend provides conversion gain of 42 dB, and achieves noise figure of below 3.3 dB, out-of-band input-referred third-order intercept point (IIP3) of -2 dBm, and IIP2 of more than 56 dBm. It draws an average current of 14.8 mA from 1.2 V.
- 레이아웃 사진 -